UnhappyFranchisee.com has received a report alleging that Matco Tools, a division of Danaher Corporation (NYSE: DHR), is actively engaged in what’s known as “franchise churning.” “Churning” is a form of franchise fraud wherein a franchisor sells franchises it knows (or should know) are doomed to fail, collects payments, then resells the same franchise once the previous franchisee fails.
UnhappyFranchisee.com has recently received numerous complaints from failed and struggling Matco Tools franchised distributors (See MATCO TOOLS Franchise Complaints) who claim they were unfairly terminated or allowed to fail by the mobile tools company.
The report is based on data reported in the 2011 Matco Franchise Disclosure Document (FDD) (MATCO TOOLS 2011 Franchise Disclosure Document), and was compiled by an analyst at the law firm of Marks & Klein, LLC of Red Bank, NJ.
Marks & Klein has an active class action lawsuit filed against Matco Tools and TD Bank on behalf of Matco franchisees (See: FRANCHISE LAWSUIT Alleges Matco Tools Scam, TD Bank Fraud, MATCO TOOLS Class Action Lawsuit, “Secret” Sales Projections), and has also sued Matco competitors Snap-on Tools and MAC Tools for franchise fraud.
The Marks & Klein report on Matco Tools comes to some disturbing conclusions, and alleges that a “fundamental failure of its franchise system is taking place,” yet “MATCO Tools has, nonetheless, continued to offer and sell Distributorships despite the pattern of early failure.”
“The information contained in the Disclosure Document paints a picture of failure on large scale, year after year, with MATCO seeking to replace Distributors whose tenure in its system is woefully short, and doing so within the calendar year in which a distributor fails,” the report alleges. “The conduct evidenced by the FDD demonstrates a pattern of churning.”
The Marks & Klein report on Matco Tools is reproduced in its entirety below, or can be read as a Word document here.
* * * * *
[Beginning of Report]
November 28, 2011
MATCO Tools 2011 FDD:
Analysis of Information contained in Item 20 Tables
We have reviewed the data contained in MATCO Tools franchise Disclosure Document issued March 11, 2011 (the “FDD”). The FDD provides information about the franchise system during calendar years 2008, 2009, and 2010.
In Item 20 of the Disclosure Document, MATCO discloses information which suggests a fundamental failure of its franchise system is taking place.
For the three year period beginning January 1, 2008, and ending December 31, 2010, MATCO presents the following results:
[Click chart to enlarge]
Of that 715, only fifty (50) transferred their MATCO Tools business to third party franchisees. Of the remaining six hundred and sixty five (665) Distributors who left the MATCO Tools system, five hundred thirty one (531) closed their Distributorships, and one hundred thirty four (134) had their distributorships terminated. If a MATCO Tools distributor desired to exit the system during this three year period, and hoped to sell its business through a MATCO approved transfer, that franchisee had less than a seven percent (7%) chance of success. Statistically speaking, such a low success rate indicates that the MATCO Tools businesses run by distributors who were leaving the MATCO system were so unprofitable as to be unmarketable.
MATCO Tools has, nonetheless, continued to offer and sell Distributorships despite the pattern of early failure. In fact, during the three year period from 1/1/08 to 12/31/10, six hundred sixty six (666) new Distributors came into the MATCO Tools system, six hundred sixteen (616) opening new MATCO Tools businesses, and fifty (50) new Distributors as Transferees.
In 2008, MATCO discloses that 213 Distributorships opened for business, 42 were terminated, and 200 ceased operations. Only seven Non-Renewals occurred, none of which is included in this analysis.
In 2009, MATCO discloses that 215 Distributorships opened for business, 41 were terminated, and 152 ceased operations. Only three Non-Renewals occurred, none of which is included in this analysis.
In 2010, MATCO discloses that 188 Distributorships opened, 51 were terminated, and 179 ceased operations. Only two Non-Renewals occurred, neither of which is included in this analysis.
The information contained in the Disclosure Document paints a picture of failure on large scale, year after year, with MATCO seeking to replace Distributors whose tenure in its system is woefully short, and doing so within the calendar year in which a distributor fails: not a single signed but not opened Franchise Agreement is disclosed in Table 5. In fact, the number of closed Distributorships disclosed in Table 3 closely tracks the number of projected Openings in Table 5, in several cases, matching exactly (by way of example only, in Arizona and Alaska, the number of projected openings equals the number of closures disclosed in Table 3 during the period). The conduct evidenced by the FDD demonstrates a pattern of churning.
The actual operating results of a MATCO Tools Distributor may be worse that the picture presented by the FDD because Item 20 Tables, prepared in accordance with the FTC Rule and NASAA Disclosure Guidelines, only include the last event in time for each Distributorship, be it a termination, a closure, or a transfer, which artificially lowers the number of terminations, closures, or transfers reflected in the FDD and as a result, analyzed.
[End of Report]
* * * * *
ARE YOU FAMILIAR WITH THE MATCO TOOLS FRANCHISE DISTRIBUTOR OPPORTUNITY? WHAT DO YOU THINK? SHARE A COMMENT BELOW.
Contact post author or site admin at UnhappyFranchisee[at]gmail.com. Corporate clarifications and/or rebuttals invited.
Recent developments have left franchisees worried and uncertain about their futures. To advocate for greater…
The Building Kidz Worldwide franchise is an opportunity to own a preschool & childcare center…
PAINT NAIL BAR has undergone some significant changes since franchisees contacted us with their complaints,…
U.S. Veterans magazine has removed JDog Brands as its #1 "Best Franchises for Veterans" list.…
More than 400 Veterans & military families who invested in JDog Brands franchises have failed,…
Genevieve McDaniel is a former franchisee turned franchise researcher, franchisee advocate, advisor and fiercely honest…
View Comments
I'm no sheep..
Here is 6 years of CHURN! You tell me how Matco has a 36% failure rate over 9 years when their failure rate of franchisees over 6 years is more than 100%?
Sean,
Tell me this. According to the information on your web site Matco Tools had a 36% SBA loan failure rate from 2000-2009.
I am wondering how that number is so low considering the number of franchisees who have been churned in and out of a Matco franchise.
I think your SBA loan stats are completely false!!! Some research would prove that number should be more like 90%+.
Would you like to challenge me on that?
Relentless writes: "I think your SBA loan stats are completely false!!!"
They aren't "our" SBA stats. They are the numbers that the Small Business Administration releases to lenders. The numbers we cited are directly from The Coleman Report, and are the same as posted on BlueMauMau.
Remember, 38% only reflects loan defaults of those who qualified for SBA loans, it's not a random sample. It's also a loan default rate, not a failure rate. Matco franchisee Villano paid off his SBA loan but still failed. He would have been a failure, but it wouldn't have been reflected as a loan default:
https://unhappyfranchisee.mystagingwebsite.com/matco-tools-lawsuit-arbitration/
Some have contended that the SBA is sloppy in their compilation of franchise loan defaults, so it could be understated (or overstated).
Churn rate is better calculated using the data from the Franchise Disclosure Documents. The analysis above of the Matco 2011 FDD states: "During the three year period from 1/1/08 to 12/31/10, seven hundred fifteen (715) Distributors, forty nine percent (49%) of the total number of MATCO Tools Distributorships open at any time during the period, left the MATCO system.
"Of that 715, only fifty (50) transferred their MATCO Tools business to third party franchisees. Of the remaining six hundred and sixty five (665) Distributors who left the MATCO Tools system, five hundred thirty one (531) closed their Distributorships, and one hundred thirty four (134) had their distributorships terminated."
Relentless writes: "Some research would prove that number should be more like 90%+."
Feel free to do that research and report your findings here. The Marks & Klein data is 2 years old now. It would be interesting to see how the numbers differ in the 2013 FDD.
Funny how admin. can shut your comments down just like MATCO on their facebook page. I guess this site is to protect franchisors by exposing things disgruntled ex-franchisees find that could hurt the franchisor in the LONG RUN! Like Presidents who lied in videos when they were Vice Presidents or District Managers who actually own NMTC Inc. dba Matco Tools.
octamnorom/relentless/etc.:
If you want to keep posting here, you need to comment with a single name, and answer your emails.
I think relentless/octamnorom/etc wants to keep posting. I think his claims are legit. I think, for some reason, that others are trying to shut him up. He doesn't cuss! He doesn't call people names. He obviously doesn't like Matco or Danaher. Why are you threatening him with control of his Constitutional Rights? Has he posted anything that violates your posting agreements? Do you disagree with his comments? Why are you threatening him Admin?
Scamdemonian/relentless/octamnorom/etc.
Three things. First, we have a policy against the same commenter posting with different names/email addresses to deceive people into thinking their opinions are shared by more than themselves. The Pro-Matco Old Boy supporters did the same thing and we called BS on them too. ADMIN can see the IP addresses of commenters, so you're not fooling anyone. Pick a name and stick with it.
Second, if I take the time to send you multiple emails, have the good manners to answer them.
Third, if commenters continually to just post the same rant regardless of the subject of the post, it gets boring, dulls the conversations, and, most importantly, bores me. Keep comments on topic. You're a guest here... this is not your personal soapbox.
Scamdemonian/relentless/octamnorom/etc., I will never infringe on your Constitutional Right to start your own blog, set your own rules, and enforce them as you see fit. I promise that when I'm a guest on your blog, I will be respectful, and I will follow your rules or go elsewhere. That's the respectful thing to do, isn't it?
I was a Matco distributor from '93-'97, this has been going on forever.
I was a Matco tool dist. from 7/2009 till 7/2014 . My issue is when I decided to close my mobile store I talked to District Manager and let him know of my intentions were. Which was to sell my route and and that i would stay till a new dist. could be found or 8 weeks that was Nov. of 2014. The next month he moved from this area to the west coast .So I then talk to the D.M. He at least gave a release form I singed it and gave it back .That was Dec.2014. So they found (3) new distributors which was great and matco divided the area I covered 3 ways. I did receive (1) payment to my account from 1 distributor . 2nd distributor i have seen nothing I have communicated with the D.M. And he keeps telling that Distributor # 2 will be writing me a check. Can't say whats going to happen with distributor #3 because just went into business so Ill wait to see how It play's out.How ever there is person who has been great and I thank her SHELLIE M. WHITNEY . As far as the two D.M.s I have dealt with are more than USED CAR SALES MAN.
I THANK FOR YOUR TIME .
Dale Merritt
PS. THE sooner I've received my money owed me the sooner I'll be able to pay of my balance .
Good to see some franchisees with the stones to tell others and warn others what Matco/ Danaher really is! Stay away from the Ponzi Scheme made legal by Senators, Government Departments and attorneys and State Representatives who have turned their backs on their OWN States laws and the people whom their SUPPOSED to serve. Through employment Americans can be victims of wrong doing by their employers. Franchising ENABLES franchisors to break laws and commit felonies and get away with their crimes. I don't care HOW successful a franchisee becomes in their franchise this industry is built on the fraud of DECEPTION!!!
By the way! Admin. has been in the franchise business for a long time! Do some research and you will find out plenty about Admin. He has been creating web sites and buying domains for many years in the franchising arena. Which brings me to the question WHY? Who would want to support a web site that defends freedom of speech and warns others about fraud? Someone who STANDS for the rights of an AMERICAN might do something like this! Someone who was once a victim as Admin. claims might do this as well. Or is wealth distributed among the Wall Street WHORES who prey on the working class and their next designed 9/11. I am not a victim by chance Mr. Admin. I am a victim by DESIGN!!! Congrads on your degree's and fields of expertice Mr. Admin. I know who you are!!! and I know what your about!!!